Cushion cover DIY5008_cushion_round_sew.jpg
Cushion cover 920243_DIY5008_824056_824164_850252_850174_22364_bundle
Cushion cover 920243_22347_920243_DIY5008_824056_824164_850252_850174_22364_bundle

  1. 1.Cut 2 circular pieces of fabric and 1 circular piece in the style-vil with 45 cm in diameter.
  2. 2.Stitch the style-vil onto the wrong side of one of the fabric pieces.
  3. 3.Mark the stitches with the marker on the style-vil following the pattern.
  4. 4.Make the stitches.
  5. 5.Stitch the 2 pieces of fabric together right side against right side, leave a piece open to turn through.
  6. 6.Turn inside out and place the pillow inside the cover.
  7. 7.Stitch the hole together by hand with small invisible stitches.
  8. 8.Pull 4 pieces of tacking thread through a needle, place it double so the stitches are done with 8 ends.
  9. 9.Make a couple of stitches through the middle of the cushion, start and finish on the back side of the cushion, pull it tight together and secure with a knots, trim the remaining thread.

Cushion cover