Peaked cap for baby DIY2007_image.jpg
Peaked cap for baby DIY2007_image_b.png

  1. Peaked cap for baby Diy2007-step.jpg
    1.Sew 2 peak pieces together (1 cm seam allowance). Trim the seam allowance along the curved edge to 0.3-0.5 mm. Turn the peak to the right side. Press. Topstitch 0.5 cm from the edge all the way around the peak.
  2. Peaked cap for baby Diy2007-step2.jpg
    2.Fold one cap piece. Stitch as illustrated. Press. This piece is the right side of the cap on the outside.
  3. Peaked cap for baby Diy2007-step3.jpg
    3.Make a second cap piece, leaving a gap at centre back for turning. This cap piece is the cap lining.
  4. Peaked cap for baby Diy2007-step4.jpg
    4.Stitch the seam at the top of the cap on the outside cap piece and the cap lining. Align the seam lines.
  5. Peaked cap for baby Diy2007-step5.jpg
    5.Insert the peak between the notches on the outside cap. Sew into place (0.7 cm seam allowance). Lay the cap lining and outside cap piece together, right sides facing. Align the centre back seam. Sew the lower edge of the cap (1 cm seam allowance).
  6. Peaked cap for baby Diy2007-step6.jpg
    6.Turn right side out via the gap. To close the gap, blind stitch by hand. Press the lower edge of the cap.