Floor cushion DIY5002_floor_cushion_sew.jpg

  1. 1.Cut 2 pieces of fabric for the top and bottom each 52 cm x 52 cm.
  2. 2.Cut the corners round following the templet.
  3. 3.Cut darts at the middle of all 4 sides on both top and bottom piece.
  4. 4.Cut a piece of fabric for the side 17 cm x 190 cm
  5. 5.Stitch the side together into a ring right side against right side with 1 cm seam allowance.
  6. 6.Cut darts on the side to divide it into 4 equal parts, cut darts both at the top and at bottom.
  7. 7.Stitch the top and bottom onto the side piece right side against right side with 1 cm seam allowance, leave a piece open to turn through.
  8. 8.Turn inside out, and make a decorative stitching with 0.5 cm seam allowance all the way round both the top and bottom.
  9. 9.Fill with polystyrene foam pellets (about 45 ltr) and stitch the hole together with small invisible stitches. Variation: Stitch piping ribbon onto the top and bottom before the side is stitched on

Floor cushion