Princess crown DIY4507_princess_crown_sew.jpg

  1. Princess crown Diy4507-step.jpg
    1.Cut 2 pieces of fabric and 1 piece of volume vlies following the pattern.
  2. 2.Press the volume vlies on one piece of the crown.
  3. 3.Press the bottom edge on both crown parts 1 cm onto the wrong side.
  4. 4.Place the 2 parts of the crown together right side against right side and stitch the tips together with 0.5 cm seam allowance.
  5. 5.Trim the tips off, and trim down in the tips, turn.
  6. 6.Stitch the crown together right side against right side into a ring with 1 cm seam allowance, and turn inside out, press.
  7. 7.Cut 2 pieces of satin ribbon 50 cm long, stitch the ribbon on at the notch.
  8. 8.Fold the bottom turn-up and stitch the 2 crowns together with an edge stitching.

Princess crown