Sewing pattern: College lettering DIY1044_image.jpg
Decorate your sewing project with stylish letters

  1. Sewing pattern: College lettering DIY1044-step1.jpg
    1.Draw the light and the dark parts of the letter onto separate pieces of Vliesofix/Bondaweb.
  2. Sewing pattern: College lettering DIY1044-step2.jpg
    2.Iron the smaller piece of the letter onto the wrong side of the teddy bear fabric - and the larger piece of the letter onto the wrong side of the imitation leather.
  3. Sewing pattern: College lettering DIY1044-step3.jpg
    3.Cut out the teddy bear fabric letter. Cut along the lines.
  4. Sewing pattern: College lettering DIY1044-step4.jpg
    4.Cut out the leather letter along the outermost line. NB: To keep the leather piece flat, cut out along the remaining lines after you have sewn the teddy bear letter onto it.
  5. Sewing pattern: College lettering DIY1044-step5.jpg
    5.Remove the backing paper on the wrong side of the teddy bear letter and place it on the imitation leather piece, equidistant from the outer edges. To affix this piece, iron on firmly. Affix the teddy bear piece 2 mm from the edge. If you wish, apply a piece of easy-tear backing to the wrong side to further stabilise the fabric.
  6. Sewing pattern: College lettering DIY1044-step6.jpg
    6.Now remove the backing (if any). To finish, trim the imitation leather piece of the letter. Iron the finished letter onto your project. Sew it into place 2 mm from the edge.