Gas cylinder cover DIY3026_cover_gas_cylinder_sew.jpg
Gas cylinder cover Diy3026-step.jpg

  1. 1.10 kg Cut a piece of fabric measuring 104cm x 84.5cm 5 kg Cut a piece of fabric measuring 104cm x 65.5cm Overlock or zig-zag the raw edges.
  2. 2.Fold the top edge (104 cm) 4.5 cm to the wrong side. Press firmly to make a press fold.
  3. 3.Stitch the fabric sides (84.5/65.5 cm), leaving a 19.5 cm gap at the top. Press seams flat and press the slit at the top 1 cm to the wrong side.
  4. 4.Sew the slit.
  5. 5.Fold the top edge at the press fold. Sew a drawstring hem (see drawing).
  6. 6.Hem the lower edge of the cover 1 cm to the wrong side. Press.
  7. 7.Cut a length of cord and pull through the drawstring hem.

Gas cylinder cover