1.Instructions: Cutting instructions: Part 1 Balloon cut out 2 x fabric and 2 x cotton batting Part 2 Drawstring hem cut out 1 x fabric 2.Sewing instructions: Sew the cotton batting onto the reverse of the balloon with a 0.5 cm seam. 
3.Cut 40 cm ribbon/cord. Sew the ribbon on one balloon part after the notch. (See fig.1) 4.Stitch the ends of the drawstring hem 1 cm onto the reverse, while pressing the sides 0.5 cm onto the reverse. 5.Stitch the hem of the balloon 2.5 cm onto the reverse, press. 6.Sew the two balloon sections together, sew roughly 10 cm after the notch. (See fig.1) 
7.Sew the drawstring hem on the balloon, placing the top edge of the drawstring hem by the notch. (See fig.2) 
8.Thread the ribbon through the ”eye” of the music box, tie in a tight knot or sew the ribbon together. (See fig.3) 9.Sew the rest of the balloon together (see fig.3), turn the right side out. The music box is now inside the balloon. 10.Thread the cord through the drawstring hem. 11.Stuff the balloon with fibre stuffing.
