Bed cover with piping
Delivery 4-8 work days Free shipping from £ 5,99
14 days returns
Secure payment with Klarna, PayPal, or creditcard.
Prices incl. VAT.
See how much fabric and trimmings you need
Suitable for interior: Linens & bedspreads
1- Fabric 1 - Cut out 4 pieces, each 22 x 200 cm Fabric 2 - Cut out 4 pieces, each 12 x 200 cm Fabric 2 - Cut out 2 pieces, each 17 x 200 cm Fabric 3 - Cut out 2 pieces, each 12 x 200 cm Fabric 4 - Cut out 2 pieces, each 22 x 200 cm Fabric 5 - Cut out 2 pieces, each 22 x 200 cm For bed cover lining, cut out 2 pieces, each 135 x 200 cm For piping, cut 3 cm-wide strips of the patterned fabrics across the width of the fabric. Sew the strips together. Make them 200 cm long.
2- Make your own piping – start by laying 2 fabric strips together at a 90-degree angle. Sew from corner to corner.
3- Trim seam and press flat.
4- Fold the fabric strip around the anorak cord. Sew close to the anorak cord using zipper foot and long stitch length.
5- Sew the piping ribbon onto the right side of the first piece of fabric. Use the zipper foot. Follow the stitching line on the piping ribbon.
6- Turn the fabric piece with the piping ribbon to the right side. Sew on the next piece of fabric. Follow the same stitching line as the seam
7- Turn the fabric back to the wrong side. Press the seam. Sew the two parts of the bed cover lining together (1 cm seam allowance) – Press. Lay the bed cover lining over the front, right sides together. Cut off any excess lining fabric. Stitch these pieces together (1 cm seam allowance) – Leave a gap open for turning. Mitre corners. Turn and press. Stitch to close gap.
See how much fabric and trimmings you need
Suitable for interior: Linens & bedspreads
1- Fabric 1 - Cut out 4 pieces, each 22 x 200 cm Fabric 2 - Cut out 4 pieces, each 12 x 200 cm Fabric 2 - Cut out 2 pieces, each 17 x 200 cm Fabric 3 - Cut out 2 pieces, each 12 x 200 cm Fabric 4 - Cut out 2 pieces, each 22 x 200 cm Fabric 5 - Cut out 2 pieces, each 22 x 200 cm For bed cover lining, cut out 2 pieces, each 135 x 200 cm For piping, cut 3 cm-wide strips of the patterned fabrics across the width of the fabric. Sew the strips together. Make them 200 cm long.
2- Make your own piping – start by laying 2 fabric strips together at a 90-degree angle. Sew from corner to corner.
3- Trim seam and press flat.
4- Fold the fabric strip around the anorak cord. Sew close to the anorak cord using zipper foot and long stitch length.
5- Sew the piping ribbon onto the right side of the first piece of fabric. Use the zipper foot. Follow the stitching line on the piping ribbon.
6- Turn the fabric piece with the piping ribbon to the right side. Sew on the next piece of fabric. Follow the same stitching line as the seam
7- Turn the fabric back to the wrong side. Press the seam. Sew the two parts of the bed cover lining together (1 cm seam allowance) – Press. Lay the bed cover lining over the front, right sides together. Cut off any excess lining fabric. Stitch these pieces together (1 cm seam allowance) – Leave a gap open for turning. Mitre corners. Turn and press. Stitch to close gap.
