Suitable for interior: Outdoor , Pillows

1- Cut 2 pieces of fabric for the top and bottom each 52 cm x 52 cm.

2- Cut the corners round following the templet.

3- Cut darts at the middle of all 4 sides on both top and bottom piece.

4- Cut a piece of fabric for the side 17 cm x 190 cm

5- Stitch the side together into a ring right side against right side with 1 cm seam allowance.

6- Cut darts on the side to divide it into 4 equal parts, cut darts both at the top and at bottom.

7- Stitch the top and bottom onto the side piece right side against right side with 1 cm seam allowance, leave a piece open to turn through.

8- Turn inside out, and make a decorative stitching with 0.5 cm seam allowance all the way round both the top and bottom.

9- Fill with polystyrene foam pellets (about 45 ltr) and stitch the hole together with small invisible stitches. Variation: Stitch piping ribbon onto the top and bottom before the side is stitched on

Suitable for interior: Outdoor , Pillows

1- Cut 2 pieces of fabric for the top and bottom each 52 cm x 52 cm.

2- Cut the corners round following the templet.

3- Cut darts at the middle of all 4 sides on both top and bottom piece.

4- Cut a piece of fabric for the side 17 cm x 190 cm

5- Stitch the side together into a ring right side against right side with 1 cm seam allowance.

6- Cut darts on the side to divide it into 4 equal parts, cut darts both at the top and at bottom.

7- Stitch the top and bottom onto the side piece right side against right side with 1 cm seam allowance, leave a piece open to turn through.

8- Turn inside out, and make a decorative stitching with 0.5 cm seam allowance all the way round both the top and bottom.

9- Fill with polystyrene foam pellets (about 45 ltr) and stitch the hole together with small invisible stitches. Variation: Stitch piping ribbon onto the top and bottom before the side is stitched on

More inspiration for you

Close