Wallhanging with gold ribbon
Materials:
65 cm of fur fabric with suede backing 4 m of ribbon/tape
Cut fabric pieces for the front:
Upholstery Velvet, curry 18 x 66cm
Upholstery Fabric,green 9 x 66 cm + 59 x 14 cm Upholstery Velvet, antique rose 18 x 66 cm Upholstery Velvet, rust 18 x 66 cm
Upholstery Velvet, black 15 x 96 cm + 59 x 20 cm Cut fabric piece for the backing Luxury Cotton, black 72 x 96 cm
See how much fabric and trimmings you need
Suitable for interior: Decoration
1- Sew the wallhanging with a 1 cm seam allowance.Glue or sew tape down the middle of the antique rose fabric. Be accurate. Secure with pins.
2- Sew the curry, green, antique rose and rust-coloured pieces together as shown in the drawing. Press seams flat.
3- Sew the green and black pieces together at the lower edge (as shown in the drawing). Press seams flat.
4- Sew the black piece (15 x 96 cm ) to the rust-coloured piece. Press seam flat.
5- Place front and backing together, right sides together. Sew at sides and bottom.Mitre corners, turn and press.
6- Glue or sew metallic tape to the lower edge of the wallhanging. Fold tape ends 1 cm to the wrong side.
7- Overlock or zig-zag the top edge of the wallhanging.
8- Fold the top edge 5 cm onto the wrong side. Stitch to form a channel.
9- Insert the dowel pin into the channel. Cut 2 lengths of round leather cord. Tie cords around dowel pin to hang.
Materials:
65 cm of fur fabric with suede backing 4 m of ribbon/tape
Cut fabric pieces for the front:
Upholstery Velvet, curry 18 x 66cm
Upholstery Fabric,green 9 x 66 cm + 59 x 14 cm Upholstery Velvet, antique rose 18 x 66 cm Upholstery Velvet, rust 18 x 66 cm
Upholstery Velvet, black 15 x 96 cm + 59 x 20 cm Cut fabric piece for the backing Luxury Cotton, black 72 x 96 cm
See how much fabric and trimmings you need
Suitable for interior: Decoration
1- Sew the wallhanging with a 1 cm seam allowance.Glue or sew tape down the middle of the antique rose fabric. Be accurate. Secure with pins.
2- Sew the curry, green, antique rose and rust-coloured pieces together as shown in the drawing. Press seams flat.
3- Sew the green and black pieces together at the lower edge (as shown in the drawing). Press seams flat.
4- Sew the black piece (15 x 96 cm ) to the rust-coloured piece. Press seam flat.
5- Place front and backing together, right sides together. Sew at sides and bottom.Mitre corners, turn and press.
6- Glue or sew metallic tape to the lower edge of the wallhanging. Fold tape ends 1 cm to the wrong side.
7- Overlock or zig-zag the top edge of the wallhanging.
8- Fold the top edge 5 cm onto the wrong side. Stitch to form a channel.
9- Insert the dowel pin into the channel. Cut 2 lengths of round leather cord. Tie cords around dowel pin to hang.