Materials:

65 cm of fur fabric with suede backing 4 m of ribbon/tape


Cut fabric pieces for the front:

Upholstery Velvet, curry 18 x 66cm

Upholstery Fabric,green 9 x 66 cm + 59 x 14 cm Upholstery Velvet, antique rose 18 x 66 cm Upholstery Velvet, rust 18 x 66 cm

Upholstery Velvet, black 15 x 96 cm + 59 x 20 cm Cut fabric piece for the backing Luxury Cotton, black 72 x 96 cm

Suitable for interior: Decoration

Wallhanging with gold ribbon

1- Sew the wallhanging with a 1 cm seam allowance.Glue or sew tape down the middle of the antique rose fabric. Be accurate. Secure with pins.

2- Sew the curry, green, antique rose and rust-coloured pieces together as shown in the drawing. Press seams flat.

3- Sew the green and black pieces together at the lower edge (as shown in the drawing). Press seams flat.

4- Sew the black piece (15 x 96 cm ) to the rust-coloured piece. Press seam flat.

5- Place front and backing together, right sides together. Sew at sides and bottom.Mitre corners, turn and press.

6- Glue or sew metallic tape to the lower edge of the wallhanging. Fold tape ends 1 cm to the wrong side.

7- Overlock or zig-zag the top edge of the wallhanging.

8- Fold the top edge 5 cm onto the wrong side. Stitch to form a channel.

9- Insert the dowel pin into the channel. Cut 2 lengths of round leather cord. Tie cords around dowel pin to hang.

Materials:

65 cm of fur fabric with suede backing 4 m of ribbon/tape


Cut fabric pieces for the front:

Upholstery Velvet, curry 18 x 66cm

Upholstery Fabric,green 9 x 66 cm + 59 x 14 cm Upholstery Velvet, antique rose 18 x 66 cm Upholstery Velvet, rust 18 x 66 cm

Upholstery Velvet, black 15 x 96 cm + 59 x 20 cm Cut fabric piece for the backing Luxury Cotton, black 72 x 96 cm

Suitable for interior: Decoration

Wallhanging with gold ribbon

1- Sew the wallhanging with a 1 cm seam allowance.Glue or sew tape down the middle of the antique rose fabric. Be accurate. Secure with pins.

2- Sew the curry, green, antique rose and rust-coloured pieces together as shown in the drawing. Press seams flat.

3- Sew the green and black pieces together at the lower edge (as shown in the drawing). Press seams flat.

4- Sew the black piece (15 x 96 cm ) to the rust-coloured piece. Press seam flat.

5- Place front and backing together, right sides together. Sew at sides and bottom.Mitre corners, turn and press.

6- Glue or sew metallic tape to the lower edge of the wallhanging. Fold tape ends 1 cm to the wrong side.

7- Overlock or zig-zag the top edge of the wallhanging.

8- Fold the top edge 5 cm onto the wrong side. Stitch to form a channel.

9- Insert the dowel pin into the channel. Cut 2 lengths of round leather cord. Tie cords around dowel pin to hang.

More inspiration for you

Close